eal 2019A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

$1,200.00

Category:

Description

Real Caterpillar ET3 Adapter III P/N 317-7485 Diagnostic Adapter for CAT

CAT ET3 Bluetooth Highlights:

  • Support WIFI
  • Software version: 2019A
  • Allow you to properly communicate with a CAT engine on dual datalinks.

If you are using the old version, please contact us. We will ask the engineer to activate remotely for you.

CAT ET3 Bluetooth function:

  • View ECM’s current configuration and change user settings
  • Perform diagnostic tests and calibrations, and calibrate
  • Electro-mechanical and electro-hydraulic components
  • Context sensitive help leads operator through every task Cat ET can perform
  • Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
  • Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.
  • Functionalities Shows all operating conditions that cause high repair costs such as: Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator
  • Cat “ET Trainer” is now included in ET Program. It allows Users to train and practice using Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.

What’s New – 2019A
ECM Naming Changes
Certain ECMs connect to the service tool over two data links at the same time. The service tool shows a message popup when the ECM is only detected on one link. The service tool has been changed to add the text **INCOMPLETE** in the ECM name when the connection is incomplete. Service tool features that display a connection icon also use a new icon for an incomplete connection.

CAT Caterpillar ET Diagnostic Tool Description

CAT Caterpillar ET Diagnostic Tool from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.

CAT Caterpillar ET Diagnostic Tool enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.

Caterpillar ET3 Adapter III Features

Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.

Over 100 custom Diagnostic, Information and Service features including:
– 2D and 3D Histogram plotting capability (engine software support required)
– Custom Status screen group
– Snapshots (Download and display snapshot data recorded by the ECM)
– Configuration Aid that allows upload/download of sam
-configuration to multiple control modules

Support car list of CAT Caterpillar ET Diagnostic Tool :
Support car list of CAT Caterpillar ET Diagnostic Tool

2019A Caterpillar ET3 Adapter III Communication:
Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
Flash program allows adapter firmware upgrades as additional features become available;
Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

PC, Coxmunication Hardware, and Cable Requirements

To run the service tool, the next PC, communication hardware, and cable requirements must be met. NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.

PC Requirements

Recommended Configurations

PC containing a 2.0 GHz dual-core processor

3GB RAM

3GB of the available hard disk drive

DVD-ROM drive (optionally)

15.4-inch XGA Screen (1280×1024 compatible)

Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)

RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)

USB 1.1 or 2.0 port (for use with Comm Adapter 3)

Ethernet RJ45 connector

Built-in pointing device or mouse

For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.

Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

Wi-Fi (for the Wireless Comm Adapter 3)

Minimum Configurations

PC containing a Pentium 2 GHz processor or greater

1GB RAM

500MB of an available hard disk drive

CD-ROM drive

Super VGA monitor or display (1024×768)

Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)

RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)

USB 1.1 or 2.0 port (for use with Comm Adapter 3)

Ethernet RJ45 connector

Built-in pointing device or mouse

For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

Communication Hardware

Caterpillar Communication Adapter III 

Configuring Cat Electronic Technician to use the Communication Adapter 3

For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:

Step 1 Start Cat Electronic Technician.

Step 2 Click the Stop Connect button when it appears.

Step 3 Select the Utilities menu.

Step 4 Choose “Preferences > Modify…”.

Step 5 Select the Communications tab.

Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.

NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.
Servicing ECMs on more than one data link requires this check box to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality.

Reviews

There are no reviews yet.

Be the first to review “eal 2019A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI”

Your email address will not be published. Required fields are marked *