Radio Stays Powered With the Ignition Switch OFF
Radio stays powered with the ignition switch OFFNOTE:
- Check for aftermarket accessories plugged into the vehicle's accessory power sockets.
- Check the connectors for poor connections or loose terminals.
1. Turn the ignition switch to LOCK (0) to see if the audio unit turns OFF.
Is the audio unit OFF?
YES - Operation is normal.
NO - Go to step 2.
2. Remove the audio-HVAC display module assembly, and disconnect audio unit connector A (20P).
NOTE: Eject all the discs before removing the audio unit to prevent damaging the CD/DVD player's load mechanism.
3. Measure the voltage between the No. 2 terminal of audio unit connector A (20P) and body ground.
Is there battery voltage?
YES - Check for short to power on YEL/RED wire.
NO - Replace the audio unit.