Rear Door Weatherstrip: Service and Repair

Rear Door Weatherstrip Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the door.

- Take care not to damage the front upper corner clip (black) and the rear upper corner clips (black) because they are not available separately.

- Use a clip remover to remove the clips.

1. Remove the rear pillar inner trim. Service and Repair

2. Remove the door checker mounting bolt (A) at the B-pillar.

3. Remove the door weatherstrip (B).
-1 Detach the clips (C, D, E, F, G).
Release the hook (H).
-3 Release the weatherstrip from the holder (I) on the door sash.

4. Install the weatherstrip in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Make sure the weatherstrip is installed in the holder securely.

- Apply medium strength liquid thread lock to the door checker mounting bolt before installation.

- Check for water leaks. Adjustments