Manufacturer Code Charts: 1403

Navigation System DTC Troubleshooting: 1403

DTC 1403:

Audio Error 3 (Display Error)

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Check the most recent DTC Reading and Clearing Diagnostic Trouble Codes.

2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

3. Check the most recent DTC Reading and Clearing Diagnostic Trouble Codes.

Is DTC 1403 indicated at the time you cycled the vehicle?

YES -

Replace the navigation display unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time.�