Keyless Operation Does Not Work (LOCK, UNLOCK, PANIC)

Keyless/Power Door Locks/Security System Symptom Troubleshooting - Keyless operation does not work (LOCK, UNLOCK, PANIC)

Keyless operation does not work (LOCK, UNLOCK, PANIC)

NOTE: Before troubleshooting, check the B-CAN DTCs. If any DTC is indicated troubleshoot the indicated DTC(s) first

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Try to start the engine.

Does the engine start?

YES -

Go to step 3.

NO -

Go to the immobilizer symptom troubleshooting Immobilizer System Symptom Troubleshooting (Without Keyless Access System).�

3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

4. Do the transmitter test Keyless Entry Transmitter Test (Without Keyless Access System).

Is the transmitter OK?

YES -

Replace the immobilizer-keyless control unit.�

NO -

Replace the transmitter.�