Lower Front Bumper Grille Replacement

Lower Front Bumper Grille Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the front bumper.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the front bumper Front Bumper.

2. If equipped, remove the headlight washer tube, as needed Service and Repair.

3. Remove the screws from back of the front bumper (A), and release the hooks (B, C, D), then remove the lower front bumper grille (E) and the fog light housing (F).





4. Install the grille in the reverse order of removal, and push the hooks into place securely.