DTC Troubleshooting

DTC Troubleshooting: P0602

DTC P0602: PCM Programming Error

NOTE:

- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information. Reading and Clearing Diagnostic Trouble Codes

- This DTC is indicated when an PCM update is not completed.

- Do not turn the ignition switch to ACC (I) or LOCK (0) while updating the PCM. If you do, the PCM can be damaged.

1. Do the PCM update procedure. ECM/PCM Update

2. Check for Pending or Confirmed DTCs with the HDS.

Is DTC P0602 indicated?
YES - Replace the original PCM. Service and Repair

NO - The update is complete.