Hawaii System Setup

The white navigation DVD contains maps for the 48 contiguous states, parts of southern Canada, and Hawaii. If the vehicle is sold in Hawaii or relocated from the mainland to Hawaii, you must change the map coverage so the applicable maps are displayed.

1. Press and hold the MENU, MAP/GUIDE, and CANCEL buttons at the same time. The display changes to the main diagnostic menu.

2. Select Detail Information & Settings.

3. Select Coverage area. Then select either Hawaii or US coverage. The system may reboot.

4. Start the vehicle, and move it to an open area so the system can acquire a GPS signal.

5. After the system has initialized, do the map matching by driving the vehicle on a road until the road name appears at the bottom of the map screen.

NOTE:

^ If a vehicle is relocated from Hawaii to the mainland, you must change the Coverage area to US.

^ When you change the coverage area, any previous destinations, address book, and other system settings are changed to the factory defaults.

^ XM Satellite Radio is not available in Hawaii, so there is no AcuraLink coverage.