Rear Undercover Replacement

Rear Undercover Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the rear bumper or the body.

1. Remove the rear undercover (A).
-1 Remove the bolts (B) and the clip (C) secure the undercover to the body.
From under the rear bumper (D), remove the clips (E) securing the undercover and the rear bumper.
-3 Lower the front area of the undercover, and pull the undercover out from the rear bumper.
NOTE: Release the clips (E) by prying up on the center pin at the notch (F).

2. Install the undercover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.