Steering Angle Sensor: Service and Repair

VSA System Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.

1. With the wheels in the straight-ahead position and the steering wheel centered, remove the steering wheel. Steering Wheel Removal

2. Remove the steering column covers Steering Column Cover Removal/Installation and the cable reel. Service and Repair

3. Remove the combination switch assembly. Steering Column Removal/Installation

4. Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body assembly (C).

5. Install the combination switch body assembly in the reverse order of removal.
NOTE:

- Do not remove the steering angle sensor from the combination switch body.

- When installing the cable reel, set the turn signal canceling sleeve position so that the arrow points straight up. Service and Repair

- Note that the tightening order is specified for the combination switch mounting screws. Steering Column Removal/Installation