Select/Reset/Information Switch Test/Replacement

Select/Reset/Information Switch Test/Replacement

1. Remove the driver's airbag assembly. Driver's Airbag Replacement

2. Disconnect the 7P connector (A) from the select/reset/information switch (B).

3. Remove the screws and the switch.






4. Measure the resistance between select/reset/information switch 7P connector terminals No. 2 and No. 6 in each switch position according to the table.





5. If the resistance is not as specified, replace the switch.

6. If the switch is OK, but there is a problem with the switch function, check the steering switches harness and cable reel.