Body Emblem: Service and Repair

Emblem/Sticker Replacement

NOTE: When removing the emblems/sticker, take care not to scratch the body.

1. To remove the front "A" emblem, raise the vehicle on a lift. From underneath the vehicle, remove the two screws, then remove the emblem.

2. Clean the body surfaces where emblems/sticker are applied with a shop towel dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

3. Apply the emblems/sticker where shown. When installing the ULEV sticker on the inside surface of the left rear door quarter glass, align the sticker with the edge of the glass mark as shown, and press the sticker into place, then remove the application tape.