Diesel Data: Automotive Repair

Evaporative Emission Control Canister: Service and Repair




EVAP Canister Replacement

With SH-AWD

1. Remove the rear differential Rear Differential Removal.

2. Remove the fuel tank Removal and Replacement.

3. Remove the EVAP canister filter Service and Repair.

4. Disconnect the quick-connect fitting (A), the hose (B), the FTP sensor 3P connector (C), and the EVAP canister vent shut valve 2P connector (D).





5. Remove the bolts (E) and the EVAP canister assembly (F).

6. Remove the EVAP canister (A) from the bracket (B).






7. Remove the EVAP canister vent shut valve (A) and the FTP sensor (B) from the EVAP canister (C).





8. Reassemble the EVAP canister with new O-rings (D), a new retainer (E), and a new cap (F), then install the EVAP canister bracket.

NOTE: Do not coat the O-rings with oil.

9. Install the parts in the reverse order of removal.

NOTE: The new fuel vapor hose has a ring pull (A) at the connector (B). When you connect the connector and confirm that the connection is secure, remove the ring pull by pulling it down.