Parking Brake Lever: Service and Repair

Parking Brake Lever Replacement

1. Release the parking brake lever fully.

2. Remove the center console Center Console Removal / Installation.

3. Remove the RF unit (if equipped) Service and Repair.

4. Remove the parking brake lever mount bolts (A).





5. Disconnect the parking brake cables (B) from the equalizer (C), then remove the parking brake lever (D).

6. Remove the parking brake switch (E).

7. Install the parking brake lever in the reverse order of removal.

NOTE: Do not scratch the coating on the link cable while handling and assembling the parking brake lever.

8. Adjust the parking brake Adjustments.