Left Flange Shaft

Left Flange Shaft

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

Removing

• General repair instructions, refer to => [ Repair Information ] 02EA (S-Tronic) Transmission.

• Observe cleanliness rules when working on transmissions, refer to => [ Clean Working Conditions ] 02EA (S-Tronic) Transmission.

- Remove left drive axle.

- Place the (V.A.G 1782) under the transmission.






- Remove the left flange shaft bolt by installing 2 bolts in the flange and counter holding flange shaft with assembly lever.

- Remove the flange shaft and the pressure spring.

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Flange Shaft and Seals on Transmission Overview ] Flange Shaft and Seals on Transmission Overview.

- Press flange shaft against spring force and tighten.

- Install the drive axle.

- Transmission fluid level, checking and filling, refer to => [ Transmission Fluid, Checking and Filling ] Transmission Fluid, Checking and Filling.