51 24 020 Removing and Installing/Replacing Rear Lid Lock For Lower Rear Lid
51 24 020 Removing And Installing/Replacing Rear Lid Lock For Lower Rear Lid
Necessary preliminary tasks:
- Remove panel for rear lid
Release screws (1).
Tightening torque 51 24 1AZ
Feed out rear lid lock (2).
If necessary, disconnect Soft Close Bowden cable (1).
If necessary, disengage emergency release (3).
Remove rear lid lock (2).
Disconnect plug connection (4).
Installation:
Note different encoding of plug connections.
XN�*:
