66 51 030 Removing and Installing/Replacing Camera For Lane Departure Warning

66 51 030 Removing And Installing/Replacing Camera For Lane Departure Warning







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESP protection).







Expand two-part mirror base cover (1) by pressing from below and detach.
Feed out two-part mirror base cover (1) and remove.

NOTE: Latch mechanisms of two-part mirror base cover (1) must not be damaged.







Slide camera (1) in direction of arrow out of mounting.
Disconnect plug connection (2). Installation note:
Make sure camera (1) is firmly seated in mounting.

Replacement:
Carry out calibration via BMW diagnosis system:
Service functions:
- Body
- Lane departure warning
- Calibrate camera







NOTE:
Heating of camera for lane departure warning is integrated in windscreen.
If heating is defective, the windscreen must be replaced.