66 54 511 Replacing Night Vision Camera

66 54 511 Replacing Night Vision Camera







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







IMPORTANT:
New component contains a CD with deblocking code.
Enable code CD is requested during coding/programming by the SSS.
Coding/programming without the enable code CD is not possible.







Necessary preliminary work:
- Removing spray nozzle for night vision camera







Release screws (2) on holder for camera (1).
Unclip catches (3) on camera holder (1).
Remove camera including holder (1).







Release lock (1) at adjusting screw (2) and press upwards in direction of arrow.
At same time twist out adjusting screw (2) and pull out complete pin with spring.







Holder (2) and fixture (3) must also be replaced when replacing camera (1).







Assembly of individual parts:
Place mount (2) on camera.
Tighten screws (1).
Tightening torque 66 54 1AZ.







Insert camera (2) with mount in holder.
Retaining lugs (1) on the mount must engage correctly in the guides on the holder (3).







After installation:
- Adjust night vision camera







Replacement:
Carry out vehicle programming and encoding.