65 13 062 Removing and Installing/Replacing Speaker (Tweeter, In Dashboard)

65 13 062 Removing and installing/replacing speaker (tweeter, in dashboard)

Special tools required:







Unclip trim (1) with special tool 00 9 327 from latch mechanisms and remove upwards.







Installation note:
Retaining lugs and clamps at marked points must not be damaged.







Release screws (1).
Tightening torque 65 13 6AZ.

Installation note:
To tighten screws, use special tool 00 9 460.
Remove the tweeter (2) from the dashboard.







Installation note:
Make sure resistor (1) is correctly seated in the corresponding bracket.







Release screws (1).
Tightening torque 65 13 5AZ.

Installation note:
To tighten screws, use special tool 00 9 460.

Remove mid-range speaker (2) from dashboard (3).







Disconnect plug connection (3) from mid-range speaker (1).
Remove tweeter (2).