51 14 000 Removing and Installing/Replacing Front BMW Badge

51 14 000 Removing And Installing/Replacing Front BMW Badge

Special tools required:







IMPORTANT: The Instructions on component bonding with double-sided adhesive tape serve as the basis for this repair instruction and must be observed without fail.







Tape off working area around the BMW badge (1) with adhesive tape.
Carefully warm up BMW badge (1) with hot air blower (temperature approx. 40 - 55°C ) and lift out with special tool 00 9 327.







Installation note:
Pull liner* off adhesive tape (2).
Position BMW badge (1) over guides (3) and press down firmly.
* Liner is the protective film on a new plate.