51 14 111 Replacing Model Name Plate, Rear

51 14 111 Replacing model name plate, rear







IMPORTANT: The Instructions for adhering badge emblem serve as the basis for these repair instructions and must be followed without fail.







Attach the upper edge of the adhesive tape (4) offset upward by measurement "y" horizontally to the shadow edge of the tailgate (3).
Transfer dimension "x" to adhesive tape (4).
Secure the model designation (1) as follows:
- Lower edge of model designation (1) with upper edge of adhesive tape (4)
- Outer lower corner point of model designation (1) with point of intersection (2)

Affix model name plate (1).
Remove adhesive tape (4).