51 75 010 Removing and Installing/Replacing Left or Right Steering Assembly Cover

51 75 010 Removing And Installing/Replacing Left Or Right Steering Assembly Cover







Necessary preliminary tasks:
- Remove front underbody protection







Unscrew all bolts.
Tightening torque 51 75 1AZ.
Lever out expanding rivets (1).
Removing steering assembly cover (2).

Installation note:
If necessary, replace faulty expanding rivets (1).
Make sure steering assembly cover (2) is correctly seated.

Replacement:
From April 09 the snap fasteners are discontinued and renewed by a conventional screw connection.