Drink Holders: Service and Repair

51 16 202 Removing and installing/replacing front cup holder







Necessary preliminary work:
- Remove centre console cover







Release screws (4).
Feed out front can holder (1) from the centre console cover (3) toward the back and take it off.

Installation note:
Make sure wiring harness (2) is correctly installed.







Installation note:
Feed retaining tabs (3) of can holder (2) correctly into the securing eye in front of the centre console cover (1).

Replacement
- Feed out wiring harness (2) including lighting element.
- Modify 12 V charging socket
- Modify the decorative trim