64 11 545 Removing And Installing Fan Housing For Heater/Air Conditioner Fan

64 11 545 Removing And Installing Fan Housing For Heater/Air Conditioner (N52T, N55)







Necessary preliminary tasks:
- Clamp off negative battery cable
- Remove right/rear suspension cross-brace







Release screws (1).
Tightening torque 12 90 4AZ. 00 00 Excerpt From Company Standard BMW GS 90003-2
Remove lid (2) for additional electronics box toward the top.







Unlock and disconnect all plug connections.
Unlatch connector housing (1 and 2) from guide of auxiliary E-box (3).







Unlock plug connection (1) on automatic air recirculation control sensor (2) and disconnect.







NOTE: Picture without supplemental electronics box.

Release screws (1) on blower housing cover (2).
Lift out blower housing cover.







Release screws (1) on fan housing (2).
Unlock plug connections (3) and disconnect.
Carefully feed out fan housing (2).