Evaporative Emission Control Canister: Service and Repair

16 12 010 Removing and installing/replacing carbon canister (US version with DMTL)







Necessary preliminary tasks:
- Detach rear silencer at rear left (exhaust system remains installed).







Release screws (2) and nuts (1) and remove stone guard (2).

Installation note:
Check and, if necessary, renew plastic nuts/sheet metal screws.







Remove heat shield (1).

NOTE: Graphic without exhaust system.







Disconnect plug connection (1).
Unlock snap fasteners (2) and disconnect lines.
Release screws and nuts (3) and remove carbon canister.

Installation note:
Tightening torque 16 13 1AZ.

The following components must be modified when the carbon canister is replaced:
- Diagnosis module