72 11 070 Removing and Installing/Replacing Front Lower Strap Fitting (Belt Tensioner), Driver's Seat

72 11 070 Removing and installing/replacing front lower strap fitting (belt tensioner), driver's seat







Necessary preliminary work:
- Remove front driver's seat







WARNING:
Read and comply with safety regulations for handling airbag modules and pyrotechnical belt pretensioners.
Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.

Switch off the ignition.







Installation note:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of hardening)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use







Unfasten plug connection (1) and disconnect.
Pull off metal clamp (2).
Release screw (3).
Tightening torque: 72 11 03AZ.
Remove belt tensioner.

Installation note:
Replace screw (3).
Belt tensioner is encoded against incorrect assembly.
Check metal clamp (2) for secure seat.