32 11 100 Replacing Gaiter for Steering Gear on Left or Right

32 11 100 Replacing Gaiter For Steering Box On Left Or Right







IMPORTANT: The hydraulic steering gear must be replaced if the polished surface of the rack is damaged (e.g. by corrosion).







Necessary preliminary tasks:
- Remove underbody protection
- Remove track rod end







Clean track rod.
Release band clamp (1) and ear clip (3).
Detach gaiter (2) from track rod.

Installation note:
Clean rack and check surface for damage (e.g. by corrosion).
Clean track rod and apply grease to taper.

NOTE: This ensures that the gaiter is not rotated when the track rod is rotated.







After installation:
- Perform chassis / wheel alignment check