31 35 000 Removing and Installing/Replacing Front Stabilizer

31 35 000 Removing And Installing/Replacing Front Stabilizer







Necessary preliminary work:
- Remove front underbody protection.
- Remove both anti-roll bar links from anti-roll bar.
- Remove F12/F13: stiffening plate.







Release screws (1).
Tightening torque 31 35 1AZ
Remove anti-roll bar (2) downwards.







Installation note:
Replace screws.

Pay attention to installation location of retaining bracket and mounting plate.
- Nose (1) on retaining bracket must point left in direction of travel
- Curve (2) on lower mounting plate points to rubber bearing