33 55 000 Removing and Installing/Replacing Rear Anti-Roll Bar

33 55 000 Removing And Installing/Replacing Rear Anti-Roll Bar







Necessary preliminary tasks:
- Remove both anti-roll bar links from anti-roll bar







Release screws (1).
Tightening torque 33 55 1AZ.

Installation note:
Replace screws.

Turn anti-roll bar (2) and remove sideways.







Installation note:
- Check both rubber mounts for damage and replace if necessary.
- Pay attention to correct installation position when installing anti-roll bar.
- The bend of the anti-roll bar must point upwards in the anti-roll bar to anti-roll bar link area.