26 11 052 Replacing Flexible Disc For Rear Propeller Shaft

26 11 052 Replacing Flexible Disc For Rear Propeller Shaft







Necessary preliminary tasks:
- Remove propeller shaft from rear axle differential and centre mount

NOTE: To protect universal joints, tie back propeller shaft in area of centre mount.







IMPORTANT:
Before removing propeller shaft:
The three-hole flange to the rear axle final drive is balanced with the propeller shaft.
The three-hole flange and the propeller shaft must be reassembled in the same position.
Mark three-hole flange (1), flexible disc (2) and propeller shaft (3) in one plane.







Release screws and remove flexible disc (1) from propeller shaft.

IMPORTANT:
Replace ZNS bolts and self-locking nuts.
Tightening torque and angle of rotation 26 11 4AZ.

Installation note:
- During installation arrows (2) on circumference of flexible disc must point to flange arms (3).







Installation note:
Check centring mount.
Replace damaged centring mount.

IMPORTANT: Plastic centring mount must not be greased.

�7g :