| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| One Cylinder |
| Without Turbo |
| Right Bank | 8.6 | 5.6 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Left Bank | 8.5 | 5.0 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Both Banks | 11.0 | 6.5 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| With Turbo |
| Right Bank | 9.6 | 6.6 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Left Bank | 9.5 | 6.5 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Both Banks | 12.0 | 9.0 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| All Cylinders |
| Without Turbo |
| Right Bank | 10.1 | 7.1 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Left Bank | 10.0 | 6.5 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Both Banks | 15.8 | 9.3 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| With Turbo |
| Right Bank | 11.1 | 8.1 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Left Bank | 11.0 | 8.0 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Both Banks | 16.8 | 11.8 | A | Includes R&R Oil Pan, Cylinder Head And Plastigage Bearings. |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings | 1.4 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Crankshaft, Renew | 3.6 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Oil Pump, Renew | 0.7 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Rear Main Oil Seal, Renew | 1.0 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Timing Chain or Gears, Renew | 1.2 | 0.0 | A | Add Any Of The Following Operations If Performed Along With Piston & Ring Jobs |
| Tune-Up | 0.6 | 0.0 | A | See Valves Grind Head Removed & Combinations. |
| Valves, Grind |
| See Valves Grind Head Removed & Combinations. |