Fuel Filler Neck: Service and Repair

Fuel Tank Filler Pipe Housing Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the right rear wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement (Service and Repair).




4. Disconnect the fuel tank filler door lock actuator wiring harness electrical connector (1).
5. Remove fuel tank filler pipe fastener (2).
6. Remove the fuel tank filler pipe from fuel tank filler pipe housing (3).




7. Remove the fuel tank filler pipe housing (1) from the body side outer panel by depressing in on the far retainer tab on the backside of the fuel tank filler pipe housing.

Installation Procedure




1. Insert the fuel tank filler pipe housing (1) to the body side outer panel.




2. Install the fuel tank filler pipe (3) at the fuel tank filler pipe housing.
3. Install the fuel tank filler pipe fastener (2).
4. Connect the fuel tank filler door lock actuator wiring harness electrical connector (1).
5. Install the rear wheelhouse panel liner.
6. Install the right rear wheel.