Turbocharger Coolant Return Pipe Replacement (LHU)

Turbocharger Coolant Return Pipe Replacement (LHU)

Removal Procedure





1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE 47716) Cooling System Draining and Filling (GE 47716).

2. Remove the catalytic converter. Refer to Catalytic Converter Replacement.

3. Remove the O2 sensor. Refer to Heated Oxygen Sensor Replacement - Sensor 1 Heated Oxygen Sensor Replacement - Sensor 1.

4. Remove the turbo exhaust pipe heat shield bolts (1) and shield (2).





5. Remove the turbo heat shield bolts (1) and the turbo heat shield (2).





6. Remove the turbo brace bolt (2) the turbo brace nut (1) and the turbo brace (3).





7. Remove the banjo bolts (1,3) and discard the seals (2).

8. Remove the turbocharger coolant return pipe (4).

Installation Procedure





1. Install NEW seals (2) to the banjo fittings (1,3) on the turbocharger coolant return pipe (4).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the turbocharger coolant return pipe banjo bolts (1, 3) and tighten to 35 Nm (26 lb ft).





3. Install a NEW turbo exhaust pipe gasket (3).

4. Install the turbo exhaust pipe elbow (2) and nuts (1) and tighten to 50 Nm (37 lb ft).





5. Install the turbo brace (3) the turbo brace bolts (1) and the turbo brace nut (2). Tighten the bolts and nuts to 58 Nm (43 lb ft).





6. Install the turbo heat shield (2) and the turbo heat shield bolts (1) and tighten to 9 Nm (80 lb in).





7. Install the turbo exhaust pipe heat shield (2) and the heat shield bolts (1).

8. Install the O2 sensor. Refer to Heated Oxygen Sensor Replacement - Sensor 1 Heated Oxygen Sensor Replacement - Sensor 1.

9. Install the catalytic converter. Refer to Catalytic Converter Replacement.

10. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Static Fill)Cooling System Draining and Filling (GE 47716) Cooling System Draining and Filling (GE 47716).