Front Crankshaft Seal: Service and Repair

Crankshaft Front Oil Seal Replacement

Special Tools

EN-34115 - Sprocket Bearing Installer

Removal Procedure





1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement Service and Repair.

2. Using a flat-bladed tool, remove the oil seal from the front cover.

Installation Procedure





1. Use the EN-34115 - Sprocket Bearing Installer in order to install the oil seal to the front cover.

2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement Service and Repair.