Sunroof Window Replacement - Rear

Sunroof Window Replacement - Rear

Removal Procedure

1. Open the sunshade.

2. Place the sunroof window in the vent position.




3. Remove the rear window (2).

1. Push up on the side covers to access the screws.

2. Remove the 4 screws (1).

4. Remove the rear window from the vehicle.

Installation Procedure

1. Align the side window brackets with the holes on left and right side of the frame.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the rear sunroof window screws (1), two on left and right side, tighten to 4 Nm (35 lb in).




3. Close the sunroof.
Inspect the gap between the window and roof. Refer to Sunroof Window Height and Opening Fit Adjustment Adjustments.

4. Close the sunroof.

5. Inspect sunroof for proper operation and water test to ensure no leaks.