Driver or Passenger Seat Back Cushion Finish Panel Replacement
Driver or Passenger Seat Back Cushion Finish Panel Replacement
Removal Procedure
1. Release the lower strap retainers of the seat back panel (1).
2. Unclip the two lower retainers (2) with a flat bladed plastic trim tool. Push both retainers inward to disengage from panel.
3. Push down on the top of the seat back panel (1) to release the top.
4. Slide the seat back panel side to side to remove it from the seat back frame.
Installation Procedure
1. Fix the top of the seat back panel (1) to the seat back frame.
2. Install the two lower retainers (2).
3. Install the lower strap retainers of the seat back panel (1).