Ashtray Replacement - With RPO D55

REMOVAL PROCEDURE



1. Remove the console center trim plate.
2. Remove the 3 fasteners (1) from the ashtray assembly.
3. Disconnect the electrical connector from the cigar lighter.
4. Remove the ashtray.

INSTALLATION PROCEDURE.



1. Install the ashtray.
2. Connect the electrical connector to the cigar lighter.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the 3 fasteners (1) in order to retain the ashtray.

Tighten
Tighten the fasteners to 2 N.m (18 lb in)

4. Install the console center trim plate.