Power Mirror Motor: Service and Repair

REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the water deflector.
3. Disconnect the electrical connector (4).
4. Remove the mirror assembly fasteners (3).
5. Carefully guide the electrical harness through the door.
6. Remove the mirror assembly (2) from the door.

INSTALLATION PROCEDURE
1. Carefully guide the electrical harness through the door.
2. Install the mirror assembly (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners (3) that secure the mirror to the door.

Tighten
Tighten the nuts to 6 N.m (53 lb in).

4. Connect the electrical connector (4).
5. Install the water deflector.
6. Install the trim panel.