Radiator Surge Tank Inlet Hose/Pipe Replacement

Surge Tank Hose/Pipe Replacement - Inlet (LY7)

Tools Required

J 38185 Hose Clamp Pliers

Removal Procedure

1. Partially drain the cooling system.




2. Using J 38185, disengage the hose clamp at the surge tank (1) and disconnect the surge tank inlet hose (2).




3. Using J 38185, disengage the hose clamp at the radiator and disconnect the surge tank inlet hose.
4. Using J 38185, disengage the hose clamp at the throttle body assembly and disconnect the surge tank inlet hose.
5. Remove the surge tank inlet hose from the vehicle.

Installation Procedure




1. Using J 38185, engage the hose clamp at the throttle body assembly and connect the surge tank inlet hose.
2. Using J 38185, engage the hose clamp at the radiator and connect the surge tank inlet hose.
3. Position the surge tank inlet hose to the retaining feature of the air cleaner assembly.




4. Using J 38185, engage the hose clamp at the surge tank (1) and connect the surge tank inlet hose (2).
5. Fill the cooling system.