Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side

Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side

Removal Procedure

1. Remove the instrument panel (I/P) retainer.




2. Remove the foam dash pad (1).




3. Disconnect the wiring harness from the air duct (1).




4. Remove the screws (1) that retain the air duct (2).
5. Remove the right air duct (2), by releasing the tabs from the module.

Installation Procedure




1. Install the right air duct (2), by pressing down until you hear the tabs engage on the HVAC module.

Notice: Refer to Fastener Notice.

2. Install the right air duct screws (1).

Tighten the screws to 2 N.m (18 lb in).




3. Connect the wiring harness to the air duct (1).




4. Install the foam dash pad (1).
5. Install the I/P retainer.