Diesel Data: Automotive Repair

Power Steering Reservoir Inlet Pipe/Hose Replacement



Power Steering Reservoir Inlet Pipe/Hose Replacement (LY7)

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front air deflector.





3. Disconnect the power steering reservoir inlet hose from the power steering cooler.





4. Remove the power steering reservoir inlet hose to frame retaining bolt.
5. Lower the vehicle.





6. Disconnect the power steering reservoir inlet hose from the power steering reservoir.
7. Remove the power steering cooler pipe/hose from the vehicle.

Installation Procedure





1. Position the power steering reservoir inlet hose to the vehicle.
2. Connect the power steering reservoir inlet hose to the power steering reservoir.





Notice: Refer to Fastener Notice.

3. Install the power steering reservoir inlet hose to frame retaining bolt.

Tighten the bolts to 4 N.m (35 lb in).





4. Connect the power steering reservoir inlet hose to the power steering cooler.
5. Install the front air deflector.
6. Lower the vehicle
7. Remove the drain pan from under the vehicle.
8. Bleed the power steering system. Refer to Power Steering System Bleeding.