Power Steering Pump Pulley Replacement
Power Steering Pulley Replacement
Tools Required
* J 25033-C Pulley Installer
* J 25034-C Pulley Remover
Removal Procedure
1. Remove the air cleaner intake duct.
2. Release the belt tension and slide the belt off the pulley. Refer to Drive Belt Replacement - Power Steering and Air Conditioning for the 3.6L (LY7) engineer Drive Belt Replacement - Air Conditioning, Power Steering and Water Pump for the 4.6L (LH2) engine.
3. Using the J 25034-C, remove the power steering pump pulley from the power steering pump.
Installation Procedure
1. Using the J 25033-C, install the power steering pump pulley to the power steering pump.
2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 in).
3. Install the drive belt.
4. Install the air cleaner intake duct.