Power Steering Pump Replacement

Power Steering Pump Replacement (LY7)

Removal Procedure

1. Remove the front air deflector.
2. Remove the power steering pulley.
3. Place a drain pan under the vehicle.
4. Remove the air cleaner intake duct.





5. Disconnect the power steering reservoir outlet hose from the power steering pump.
6. Disconnect the power steering pressure hose from the power steering pump.





7. Remove the power steering bracket to the engine mounting bolts (1, 2, and 3).
8. Remove the power steering pump with bracket from the vehicle.
9. Remove the power steering pump bracket from the power steering pump.

Installation Procedure

1. Install the power steering pump to the power steering pump bracket.





2. Install the power steering pump with bracket to the vehicle.

Notice: Refer to Fastener Notice.

3. Install the power steering pump bracket to the engine mounting bolts (1, 2 and 3).

Tighten the bolts in sequence to 50 N.m (37 lb ft).

4. Connect the power steering pressure hose to the power steering pump.





5. Connect the power steering reservoir outlet hose to the power steering pump.
6. Remove the drain pan from under the vehicle.
7. Install the power steering pulley.
8. Install the air cleaner intake duct.
9. Bleed the power steering system. Refer to Power Steering System Bleeding.
10. Install the front air deflector.