Amplifier: Service and Repair

Radio Speaker Amplifier Replacement

Removal Procedure

1. Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement (Service and Repair) .




2. Remove the bolts securing the amplifier to the vehicle.
3. Disconnect the electrical connectors.
4. Remove the amplifier.



Installation Procedure





1. Connect the electrical connectors.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the bolts securing the amplifier to the vehicle.

Tighten the bolts (1) to 9 N.m (80 lb in).

3. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement (Service and Repair) .
4. Refer to Control Module References (Programming and Relearning) for programming and setup information.