Power Steering Fluid Reservoir Outlet Hose Replacement

Power Steering Fluid Reservoir Outlet Hose Replacement

Removal Procedure

1. Place drain pans under the vehicle.

2. Remove as much power steering fluid from the power steering fluid reservoir as possible.

3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement Service and Repair.

4. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.




5. Release the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the power steering pump.




6. Release the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the power steering fluid reservoir.

7. Remove the power steering fluid reservoir outlet hose (2) from the vehicle.

Installation Procedure




1. Position the power steering fluid reservoir outlet hose (2) in the vehicle.

2. Connect the power steering fluid reservoir outlet hose (2) to the power steering fluid reservoir and secure with the power steering fluid reservoir outlet hose clamp (1).




3. Connect the power steering fluid reservoir outlet hose (2) to the power steering pump and secure with the power steering fluid reservoir outlet hose clamp (1).

4. Clean any excess power steering fluid from the vehicle and remove the drain pans.

5. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.

6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement Service and Repair.

7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding Service and Repair.