Finding A Station

AM-FM: Press this button in order to switch between AM, FM1 and FM2. The display will show your selection.

TUNE: Turn this knob in order to choose the radio station.

SEEK: Press the right arrow in order to tune to the next higher station and the left arrow in order to tune to the next lower station and stay there.

SCAN: Press and hold one of the SEEK arrows for two seconds until SCAN appears on the display. Use SCAN in order to listen to stations for a few seconds. The radio will go to a station, stop for a few seconds, then go to the next station. Press one of the SEEK arrows again in order to stop the scanning. The sound will mute while scanning.

Push-buttons: The 6 numbered push-buttons let you return to your favorite station. You can set a maximum of 18 stations (6 AM, 6 FM1 and 6 FM2), using the following procedure:
1. Turn ON the radio.
2. Press AM-FM in order to select the band.
3. Tune in the desired station.
4. Press AUTO TONE in order to select the equalization that best suites the type of station selected.
5. Press and hold one of the 6 numbered buttons. The sound will mute. When the sound returns, release the button. Whenever you press that numbered button, the station you set will return and the AUTO TONE equalization that you selected will also be automatically selected for that button.
6. Repeat the steps for each push-button.

P.SCAN: Press and hold one of the arrows for more than four seconds. Use P.SCAN in order to listen to each of your favorite stations stored on your push-button for a few seconds. The radio will scan through each of the stations stored on your push-button, except those stations with weak reception. The AUTO TONE setting stored for that push-button will be automatically chosen. Press P.SCAN or one of the push-button in order to stop scanning. P.SCAN will be displayed whenever the tuner is in the P.SCAN mode. The channel number (P1-P6) will appear momentarily just before the frequency is displayed. In FM mode, this function will scan through both FM1 and FM2 preset Stations and FM1 or FM2 will appear on the display.