DTC 084

DTC 084

Circuit Description

When the ignition switch is turned to ON, the sensing and diagnostic module (SDM) will perform a turn-on test to diagnose critical malfunctions within the SDM itself.

Upon passing this test, ignition and deployment loop voltages are measured to ensure they are within the normal voltage ranges. The SDM monitors the voltages at the driver low and passenger low to detect shorts to ground or voltage in the deploy loops.

Conditions for Setting the DTC

* The side air bag sensor wiring of the passenger high is shorted to battery wiring.

* The side air bag sensor wiring of the passenger low is shorted to battery wiring.