Rear Window Defogger Braided Lead Wire

Rear Window Defogger Braided Lead Wire

The rear window defogger bus lead wire or the terminal can be reattached by resoldering. Use a solder containing 3 percent silver and a rosin flux paste.





1. The repair area should be buffed with fine steel wool before soldering the bus lead wire.

2. Apply the paste-type rosin flux in small quantities to the wire lead and the bus lead wire repair area using a brush.

3. Coat the soldering iron tip with solder. Use only enough solder to ensure a complete repair.

4. Use only enough heat to melt the solder. Do not overheat the wire when resoldering to the bus lead wire.