High Mounted Stop Lamp Replacement (Rear Spoiler)

High Mounted Stop Lamp Replacement (Rear Spoiler)

Removal Procedure






Caution: Refer to Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the spoiler.
3. Remove the screws and the spoiler CHMSL.
4. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.

Notice: Refer to Fastener Notice.

2. Install the spoiler CHMSL with the screws.

Tighten the CHMSL mounting screws to 3 N.m (27 lb in).

3. Install the spoiler.
4. Connect the negative battery cable.