Front Seat Belt Replacement

Front Seat Belt Replacement

Repair Procedure




1. Remove the bolt and the seat belt anchor on the upper center pillar.




2. Remove the lower center pillar trim panel.
3. Remove the bolt and the seat belt anchor on the lower center pillar.




4. Disconnect the pretensioner connector (3).
5. Remove the bolt (2) and the seat belt retractor (1).

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the seat belt retractor (1) with the bolt (2).

Tighten the seat belt retractor bolt to 38 N.m (28 lb ft).

2. Connect the pretensioner connector (3).




3. Install the seat belt anchor to the upper center pillar with the bolt.

Tighten the seat belt anchor bolt to 38 N.m (28 lb ft).




4. Install the lower center pillar trim panel.
5. Install the seat belt anchor to the lower center pillar with the bolt.

Tighten the seat belt anchor bolt to 38 N.m (28 lb ft).